How Does Auto-Voip Use Acls; Default Auto Voip Values - Dell Networking N4000 Series Configuration Manual

Stackable layer 2 and 3 switches

Hide thumbs Also See for Networking N4000 Series:

Table of Contents

Auto-VoIP is limited to 16 sessions and makes use of the switch CPU to

classify traffic. It is preferable to use the Voice VLAN feature in larger

enterprise environments as it uses the switching silicon to classify voice traffic

onto a VLAN.

How Does Auto-VoIP Use ACLs?

Auto-VoIP borrows ACL lists from the global system pool. ACL lists allocated

by Auto-VoIP reduce the total number of ACLs available for use by the

network operator. Enabling Auto-VoIP uses one ACL list to monitor for VoIP

sessions. Each monitored VoIP session utilizes two rules from an additional

ACL list. This means that the maximum number of ACL lists allocated by

Auto-VoIP is two.

Table 42-1 shows the global default value for Auto VoIP.

Table 42-1. Auto VoIP Global Defaults

Configuring Auto VoIP

Default Value

Show Quick Links

Table of Contents