Configuring Diffserv (Cli); Diffserv Configuration (Global); Diffserv Class Configuration For Ipv4 - Dell Networking N4000 Series Configuration Manual

Configuring DiffServ (CLI)

This section provides information about the commands you use to configure
DiffServ settings on the switch. For more information about the commands,
Dell Networking N2000, N3000, and N4000 Series Switches CLI
see the
Reference Guide

DiffServ Configuration (Global)

Beginning in Privileged Exec mode, use the following commands in to
configure the global DiffServ mode and view related settings.
CLI Command
configure
diffserv
exit
show diffserv

DiffServ Class Configuration for IPv4

Beginning in Privileged Exec mode, use the following commands to configure
DiffServ classes for IPv4 and view related information.
CLI Command
configure
class-map match-all
name
match any
match class-map
1300
Configuring Differentiated Services
at support.dell.com/manuals.
Description
Enter global configuration mode.
Set the DiffServ operational mode to active.
Exit to Privileged EXEC mode.
Display the DiffServ general information, which
includes the current administrative mode setting as
well as the current and maximum number of
DiffServ components.
Description
Enter global configuration mode.
class-map-
Define a new DiffServ class and enter Class-Map
Configuration mode for the specified class.
NOTE:
class that has already been created, use the class-
map
Configure a match condition for all the packets.
Add to the specified class definition the set of
match conditions defined for another class.
To enter Class-Map Configuration mode for a
class-map-name
command.