Cos Interface Configuration Commands; Interface Queue Configuration - Dell Networking N4000 Series Configuration Manual

CoS Interface Configuration Commands

Beginning in Privileged Exec mode, use the following commands in to
configure the traffic shaping and WRED exponent values for an interface.
CLI Command
configure
interface
interface
bw
traffic-shape kbps
random-detect exponential-
weighting-constant

Interface Queue Configuration

Beginning in Privileged Exec mode, use the following commands in to
configure and view CoS interface queue settings.
CLI Command
configure
interface
interface
Description
Enter Global Configuration mode.
Enter Interface Configuration mode, where
is replaced by gigabitethernet
tengigabitethernet
port-channel number
Sets the upper limit on how much traffic can leave a
port. The
bandwidth value from 64 to 4294967295 kbps.
Configure the WRED decay exponent (range: 0–15)
exponent
for the interface. The weighting constant exponent
determines how much of the previous average queue
length sample is added to the current average queue
length. A value of 0 indicates that no weight is given
to the previous sample and only the instantaneous
rate is used. A value of 1 indicates that 1/2 of the
difference between the instantaneous value and the
previous value is added to the current value; a value of
2 implies that 1/4 of the difference is added, 3 implies
1/8 of the difference is added, etc.
Description
Enter Global Configuration mode.
Enter Interface Configuration mode, where
replaced by gigabitethernet
tengigabitethernet
channel number
unit/slot/port
.
bw
variable represents the shaping
unit/slot/port
unit/slot/port
.
Configuring Class-of-Service
interface
unit/slot/port
,
, or port-channel
interface
,
., or port-channel
is
port-
1325