Page 2
The warranty does not apply to any product where the serial number has been removed or obliterated. The warranty also does not apply to any product sold by a reseller to an end user outside of the country where the reseller is located unless (i) Christie has an office in the country where the end user is located or (ii) the required international warranty fee has been paid.
For protection from ultraviolet radiation, keep all product housings intact during operation. • UV EXPOSURE! Protective UV safety glasses with side shields and Christie approved protective safety clothing must be worn when performing optical adjustments or servicing the product. •...
Page 12
Safety precautions Caution! If not avoided, the following could result in minor or moderate injury. • Only Christie qualified technicians are permitted to open product enclosures. • Install the product near an easily accessible AC receptacle. Lamp Warning! If not avoided, the following could result in death or serious injury.
For complete production documentation and technical support, go to www.christiedigital.com. Projector overview The Christie CP2308 is a compact 3DLP cinema projector suited for theaters with screens up to 10.5 meters (35 feet). The CP2308 provides an improved user interface and enhanced functionality, supporting future higher speed video interfaces.
Inverted Front Projection from behind the audience with the projector in an inverted position (upside down). Inverted positioning is not supported for CP2308 projectors. For more information, see the CP2308 Installation and Setup Manual. Normal Rear Projection from behind the screen with the projector in the normal, upright position.
A user account is a set of credentials consisting of both a user name and password that allows access to a projector settings. Default user access permissions This table lists the Christie touch panel access permissions. Permission Description...
Setting up an integrated media block You can configure CP2308 to work with different models of integrated media blocks, including the Christie IMB. Selecting IMB preferences Choose from the available options to set the type of integrated media block (IMB).
A playlist is a list of content files and automated events that play in an order that you define. To manage minor time gaps between content files, Christie recommends inserting a short period of black screen with no audio. To achieve this, you can insert a BLACK MOS clip into the playlist. BLACK MOS clips are small, silent compositions and are set in varying lengths to accommodate different projection requirements.
• 3D Line Interleaved: The left eye and right eye data are sent on alternating lines. 3D Sync Input Mode is not required when using the Christie IMB. For GDC IMB devices, the recommended setting is 3D Line Interleaved. CP2308 User Guide 020-102535-03 Rev.
Adjusting the image Adjust the projector image. Christie recommends warming the lens before completing these procedures as focus may change as the lens warms. Correcting keystone effect Learn how to adjust the image to correct keystone effect. Keystone effect occurs when you project an image onto the screen at an angle. As a result, the image appears distorted and resembles a trapezoid.
When adjusting boresight, you must maintain the boresight distance from the lens to the prism plane set by Christie. For example, when you move the top screw outward, turn the bottom two boresight screws to maintain the overall distance.
Caution! If not avoided, the following could result in minor or moderate injury. • This procedure must be performed by Christie qualified technicians. CP2308 User Guide 020-102535-03 Rev. 1 (08-2018) Copyright 2018 Christie Digital Systems USA, Inc.
Page 57
When adjusting boresight, you must maintain the boresight distance from the lens to the prism plane set by Christie. For example, when you move the top screw outward, turn the bottom two boresight screws to maintain the overall distance.
Normally, the three colors should overlap precisely to form pure white lines throughout the image and one or more poorly converged individual colors may appear adjacent to some or all of the lines. Contact your Christie accredited service technician to correct DMD convergence issues. Adjusting the fold mirror Learn how to align the fold mirror with the optical system to correct an image with missing or shadowy corners or edges.
5. In the Eye Selection column, select Right or Left. Enabling content synchronization Complete this procedure on the master projector. Content synchronization is supported for Christie network attached storage (NAS) devices only. To synchronize content, you must also enable the Multi-Projector Control option on the master projector.
Places the projector in full power mode (douser open, light on) Wait Delays the execution of a macro Christie ACT actions These are the available built-in commands for the Christie ACT: Command Description Buzzer Activates the buzzer for the specified time (in milliseconds)
Do not operate the cinema projector without all of its covers in place. Caution! If not avoided, the following could result in minor or moderate injury. • Christie products must be installed and serviced by Christie qualified technicians. • Only Christie qualified technicians are permitted to open product enclosures.
Typically, optical components do not need to be cleaned frequently if they are installed and operated in a location that meets or exceeds the environmental standard recommended by Christie. Christie recommends that all cinema projectors are installed and operated in an environment that meets or exceeds Underwriters Laboratories (UL) standard 609.50 Pollution Degree 2 and ISO Class 9 Standard...
Complete the following procedure to install the lamp. Warning! If not avoided, the following could result in death or serious injury. • This procedure must be performed by Christie qualified technicians. • EXPLOSION HAZARD! Always wear manufacturer approved protective safety clothing (gloves, jacket, face shield) whenever the lamp door is open or when handling the lamp.
If the POWER LED is green and additional LEDs are lit on the F-MAIN faceplate, record the color combination of the faceplate LEDs after they have been powered for at least 30 seconds. You can then provide the color combination information to Christie technical support. •...
Listen for a clicking noise that indicates the ballast is attempting to strike the lamp. If you do not hear a clicking noise, there might be a problem with the ballast. Contact a Christie accredited service technician to resolve the issue.
Increase the lamp power. Lamps that are near end of service may not operate reliably at a lower power setting. • A fold mirror or integrator rod misalignment could exist. Contact your Christie qualified service technician to resolve the issue. Blank screen with no display of cinema image When the projector is turned on, nothing is displayed.
Page 110
Corporate offi ces Worldwide offi ces Christie Digital Systems USA, Inc. Australia Germany Republic of South Africa United Kingdom Cypress ph: +61 (0) 7 3624 4888 ph: +49 2161 664540 ph: +27 (0)11 510 0094 ph: +44 (0) 118 977 8000...