Other Parameters; Input/Output Parameters - Toshiba TOSVERT VF-MB1 Instruction Manual

6. Other parameters

Extended parameters are provided for sophisticated operation, fine adjustment and other special purposes. Modify
parameter settings as required. Refer to section 11 tables of extended parameters.
6.1

Input/output parameters

6.1.1 Low-speed signal
f100 : Low-speed signal output frequency
 Function
When the output frequency exceeds the setting of f100 an ON signal will be generated. This signal
can be used as an electromagnetic brake excitation/release signal.
This signal can also be used as an operation signal when f100 is set to 0.0Hz, because an ON
signal is put out if the output frequency exceeds 0.0Hz.
Output from the open collector output terminal RY-RC. (Default)
Output FLA-FLB-FLC and OUT are possible depending on the parameter settings.
[Parameter setting]
Title
f100
Function
Low-speed signal output frequency
Output frequency [Hz]
Setting frequency

0
Low-speed detection signal :
OUT-NO terminals
Inversion of low-speed
detection signal
Adjustment range
0.0 - fh (Hz)
F-1
E6581697
6
Default setting
0.0
Time [s]
ON
OFF
ON
OFF