Free Notes - Toshiba TOSVERT VF-MB1 Instruction Manual

Peer-to-peer communication
When all slave inverters are connected they operate at the same frequency as the master inverter (no setting of
point frequencies in this case)
Master inverter
INV
No.00
: Use the terminal board to branch the cable.
(1) The master inverter transmits frequency command data to its slave inverters.
(2) The slave inverter calculate a frequency reference from the data received and save the frequency calculated.
(3) As a result, all slave inverters operate at the same frequency as the master inverter.
6
Note: The master inverter always sends frequency command data to its slave inverters.

6.33.3 Free notes

f880 : Free notes
 Function
[Parameter setting]
f880 Free notes
6.33.4 CANopen
c700 to c830 : CANopen communication parameters
Built-in CANopen
CANopen option
Refer to "CANopen communication Instruction Manual" for details.
INV
No.01
The slave inverters are always on standby so that they can receive an frequency command from the
master inverter at anytime.
To enable easier management and maintenance of the inverter, it is possible to enter the identification
number.
Title Function
INV INV
No.02 No.03
Adjustment range
0 – 65530 (65535)
(Type: CAN001Z, CAN002Z, CAN003Z)
F-126
: Wiring
: Data (Master  Slave)
INV INV
No.29 No.30
Default setting
E6581697
0