Toshiba TOSVERT VF-MB1 Instruction Manual page 82

4.2.1 Settings in the Easy setting mode
The inverter enters this mode by pressing the MODE key when the Easy setting mode is selected
When you are unsure of something
during operation:
You can return to the Standard monitor
mode by pressing the MODE key
several times.

MODE
Standard monitor mode
(1)
 Setting parameters in the Easy setting mode
(1) Selects parameter to be changed. (Turn the setting dial.)
(2) Reads the programmed parameter setting. (Press the center of the setting dial.)
(3) Change the parameter value. (Turn the setting dial.)
(4) Press this key to save the change. (Press the center of the setting dial.)
To switch to the Standard setting mode, press the EASY key in the Standard monitor mode. "" is displayed,
and the mode is switched.
Easy setting mode (Default registered parameters)

(2)

MODE
(3)


D-5
Title
Command mode selection

Frequency setting mode selection

Acceleration time 1

Deceleration time 1

Motor overload protection level 1

Connection meter adjustment

EASY key mode selection


(4)
 ⇔
* Parameter title and the setting
value are displayed alternately
E6581697
Function
*
4