Status monitor mode
The inverter can be moved through each of the modes by pressing the MODE key.
4
Monitoring of
operation status
Refer to section 8.2
The mode for monitoring all inverter status.
Allows monitoring of set frequencies, output current/voltage and terminal
information.
Refer to chapter 8.
MODE
MON
Status monitor mode
PRG
Frequency setting method
Refer to section 3.2.2
RUN
Standard monitor mode
(At power source on)
MODE
D-2
MODE
y
PRG
Setting monitor mode
How to search and set
parameters
Refer to section 4.2
E6581697