Toshiba TOSVERT VF-MB1 Instruction Manual page 37

 How to install
 Do not install or operate the inverter if it is damaged or any component is missing.
1
Prohibited
 Mount the inverter on a metal plate.
 Do not operate with the front panel cover removed.
 An emergency stop device must be installed that fits with system specifications (e.g. shut off input
Mandatory
action
 All options used must be those specified by Toshiba.
 The main unit must be installed on a base that can bear the unit's weight.
 If braking is necessary (to hold motor shaft), install a mechanical brake.
Mandatory
action
(1) Side-by-side installation
Select an indoor location with good ventilation, and then install it upright on a flat plate.
When installing multiple inverters, these can be installed side-by-side horizontally.
When using the inverter in locations with temperatures above 40°C, the current reduction is necessary.
Refer to section 6.14 of E6581697 for details.
(2)
VFMB1S-2002 to 2022PL and VFMB1-4004 to 4037PL can be installed as flat mounting.
Panel 90 degree attachment option is useful for flat mounting. (Type: SBP008Z)
This can result in electric shock or fire. Call your Toshiba distributor for repairs.
The rear panel gets very hot. Do not install in an inflammable object, this can result in fire.
This can result in electric shock.
power then engage mechanical brake).
Operation cannot be stopped immediately by the inverter alone, thus risking an accident or injury.
The use of any other option may result in an accident.
If the unit is installed on a base that cannot withstand that weight, the unit may fall resulting in injury.
The brake on the inverter will not function as a mechanical hold, and if used for that purpose, injury
may result.
Flat mounting installation
Side-by-side installation
5 cm or more
Inverter Inverter
5 cm or more
Warning
Caution
Flat mounting installation
Inverter
A-24
5 cm or more
Inverter
3 cm or more
3 cm or more
5 cm or more
E6581697