Toshiba TOSVERT VF-MB1 Instruction Manual page 123

Output frequency attainment signal
: OUT-NO terminals
Inversion of output frequency
attainment signal
6.1.3 Output of set frequency speed reach signal
f101 : Speed reach setting frequency
f102 : Speed reach detection band
 Function
When the output frequency becomes equal to the frequency set by f101f102 , an ON or OFF
signal is generated.
[Parameter setting]
Parameter setting of frequency and detection band
Title
Speed reach setting frequency
f101
Speed reach detection band
f102
Parameter setting of output terminal selection
Title
Output terminal
f131
selection 2A (OUT)
Setting value 9 is reverse signal.
Note: Set f132 to assign to FLA-FLC-FLB terminals and f130 to RY-RC terminal.
Output frequency [Hz]
Designated frequency  
Setting frequency
Designated frequency  
0
Function
Function Adjustment range
0-255
(Refer to section 11.7.)
F-3
Adjustment range
0.0- fh (Hz)
0.0- fh (Hz)
Setting
8: RCHF (Set frequency attainment
signal)
E6581697
Time [s]
ON
OFF
ON
OFF
6
Default setting
0.0
2.5