Jumper Settings - Fujitsu PRIMERGY TX120 User Manual

Chapter 8 Configuring Hardware

8.1 Jumper Settings

The BIOS password setting can be deleted through the jumper settings.
Do not change the jumper settings in normal use.
Jumper location
The jumper of the server is located on the baseboard as shown below.
Jumper settings
To change the setting, set the jumper as follows:
example)
Standard setting (1-2)
Functions and settings of each jumper are as follows:
Jumper
number
JP1
System BIOS
recovery
JP2
Password Skip
JP3 Clear CMOS
148
Changing the setting (2-3)
table: Jumper settings
Function Setting
1-2 (standard)
2-3
1-2 (standard)
2-3
1-2 (standard)
2-3
JP1
JP2
JP3
Description
Activates with the normal BIOS information.
Activates with the saved BIOS information.
Enables the BIOS password.
Disables the BIOS password.
Retains the information stored on CMOS.
Deletes the information stored on CMOS.