Jumper Settings; Jumper Location And Settings - Fujitsu PRIMERGY RX600 S4 User Manual

Chapter 7 Configuring Hardware and Utilities

7.1 Jumper Settings

This section explains jumper settings.

7.1.1 Jumper Location and Settings

Jumper location
The jumper of the server is located on the baseboard as shown below.
Jumper settings
Each jumper's meaning and setting are as follows.
Jumper number
J3C2
J3C3
150
table: Jumper settings
Meaning Setting value
BIOS password 1-2 (Initial value)
2-3
CMOS 1-2 (Initial value)
2-3
J3C2 1
2
3
J3C3 1
2
3
Description
To disable or delete the password, set "2-3".
To clear CMOS, set "2-3".