Installable Expansion Cards And Notes - Fujitsu primergy TX150 User Manual

Chapter 7 Installing Internal Options

7.4.2 Installable Expansion Cards and Notes

■ Installable Expansion Cards
Installable card (Model name)
RAID Ctrl 0-Channel 128MB w/ BBU
(PG-140D1)
Remote Service Board (PG-RSB103)
SCSI Ctrl U160 w (PG-129B)
SCSI Ctrl U160 (PG-128)
Eth. Ctrl 2x1Gbit PCI-E 1000-BASE-T (PG-2861)
Eth. Ctrl 1000-BASE-T Cu (PG-1892)
Eth. Ctrl 1000-BASE-T Cu (PG-1852)
■ Order of Expansion Card Installation
Install expansion cards into the slots in accordance with the priority indicated in the following table.
Installable expansion card (Model name)
RAID Ctrl 0-Channel 128MB w/ BBU
(PG-140D1)
Remote Service Board (PG-RSB103)
Eth. Ctrl 2x1Gbit PCI-E 1000-BASE-T (PG-2861)
SCSI Ctrl U160 w (PG-129B)
SCSI Ctrl U160 (PG-128)
Eth. Ctrl 1000-BASE-T Cu (PG-1892)
Eth. Ctrl 1000-BASE-T Cu (PG-1852)
Follow the "Installation order" shown in the table when installing the cards and drivers. If you turn on
the power after installing multiple expansion cards simultaneously or in a wrong order, they will not
function properly.
■ Notes on Installing Expansion Cards
• Install installable expansion cards only.
• Before installing an expansion card, refer to "PRIMERGY ServerBooks" supplied with the server,
and "Supplement" supplied with options.
196
table: List of Installable Expansion Cards
1
2
3
3
table: Expansion Card Installation Order and Slots
Number
of cards
1
1
3 For internal options (Ultra 160 SCSI)
For external or internal options (Ultra 160
SCSI)
1 PCI-Express 1000BASE-T
3 1000BASE-T
1000BASE-T
PCI slot
1 2 3 4 5 E
- 1 - - - -
1 - - - - -
- - - - 1
-
- - - 1 - -
3 - 4 1 2 -
3 2 1 5 4 -
2 1 5 4 -
3
Remarks
Installation
order
1
2
3
4
5
6
7