Installable Expansion Cards And Notes - Fujitsu PRIMERGY RX200 S2 User Manual

Chapter 7 Installing Internal Options

7.5.2 Installable Expansion Cards and Notes

This section explains expansion cards that can be installed on this server and provides notes on
installation.
■ Installable Expansion Cards
Up to two expansion cards listed on the following table can be installed in the server.
Installable expansion card (Model name)
RAID Ctrl 2-Channel 128MB w/ BBU
(PG-142E3)
IB HCA Card (PG-HSC101)
Eth. Ctrl 1000-BASE-T Cu (PG-1852)
Eth. Ctrl 2 x 1000-BASE-T Cu (PG-1862)
Fibre Channel Controller (PG-FC106)
Eth. Ctrl 1000-BASE-SX Fibre LC lp (PG-
1882L)
Eth. Ctrl 1000-BASE-T Cu lp (PG-1892L)
SCSI Ctrl U160 lp (PG-130L)
Remote Service Board (PG-RSB103L)
*1: The Eth. Ctrl 2 x 1000-BASE-T Cu (PG-1862) cannot be installed together with other LAN cards.
■ Location and Order of Expansion Card Installation
For expansion cards, use the PCI slots in accordance with the order indicated in the following table.
Install cards in the following order. If they are installed in the wrong order, they will not work properly.
Installable expansion card (Model name)
RAID Ctrl 2-Channel 128 MB w/ BBU (PG-142E3)
IB HCA Card (PG-HSC101)
Eth. Ctrl 1000-BASE-T Cu (PG-1852)
Eth. Ctrl 2 x 1000-BASE-T Cu (PG-1862)
Fibre Channel Controller (PG-FC106)
Eth. Ctrl 1000-BASE-SX Fibre LC lp (PG-1882L)
Eth. Ctrl 1000-BASE-T Cu lp (PG-1892L)
SCSI Ctrl U160 lp (PG-130L)
Remote Service Board (PG-RSB103)
-: Installation is impossible.
180
table: List of Installable Expansion Cards
Number
of cards
1
1
1
*1
1
1
2
2
2
1
table: Installation Order and Slots for Expansion Cards
Remarks
For external array systems
(Ultra320 SCSI x 2ch)
Not supported in Windows
1000BASE-T
1000BASE-T, Dual Port
2
1000BASE-SX, LowProfile
1000BASE-T, LowProfile
For external SCSI devices
(Ultra160 SCSI, LowProfile)
PCI slot
1 2
1 -
1 -
1 -
1 -
1 -
1 2
1 2
1 2
1 2
Installation
order
1
2
3
4
5
6
7
8
9