Installable Expansion Cards And Notes - Fujitsu Primergy RX100 S3 User Manual

Chapter 7 Installing Internal Options

7.4.2 Installable Expansion Cards and Notes

This section explains expansion cards that can be installed and provides notes on installation.
■ Installable Expansion Cards
Up to two expansion cards listed on the following table can be installed in the server.
Installable expansion card (Model name)
Remote Service Board (PG-RSB103L)
SCSI Ctrl U160 lp (PG-1301L)
Eth. Ctrl 1000-BASE-T Cu lp (PG-1892L)
Eth. Ctrl 1000-BASE-SX Fibre LC lp
(PG-1882L)
Eth. Ctrl 2x1000-BASE-T Cu (PG-1862)
Eth. Ctrl 1000-BASE-T Cu (PG-1852)
■ Location and Order of Expansion Card Installation
For expansion cards, use the PCI slots in accordance with the order indicated in the following table.
Follow the Installation order shown in the table when installing the cards and drivers.
If you install expansion cards after changing the installation order, they will not function properly.
Installable expansion card (Model name)
Remote Service Board (PG-RSB103L)
SCSI Ctrl U160 lp (PG-1301L)
Eth. Ctrl 1000-BASE-T Cu lp (PG-1892L)
Eth. Ctrl 1000-BASE-SX Fibre LC lp (PG-1882L)
Eth. Ctrl 2x1000-BASE-T Cu (PG-1862)
Eth. Ctrl 1000-BASE-T Cu (PG-1852)
-: Not installable.
186
table: List of Installable Expansion Cards
Number
of cards
1
1
2
2
2
1
1
table: Installation Order and Slots for Expansion Cards
Remarks
For an internal hard disk unit and an external
SCSI option (Ultra 160 SCSI, LowProfile)
1000BASE-T, LowProfile
2
1000BASE-SX, LowProfile
1000BASE-T, Dual Port
1000BASE-T
PCI slot
1 2
- 1
2 1
2 1
2 1
1 -
1 -
Installation Order
1
2
3
4
5
6