Inspection; Rear Shock Absorber Disposal - Suzuki DL650K5 Service Manual

Table of Contents

Advertisement

7-46
CHASSIS

INSPECTION

Inspect the shock absorber body and bushing for damage and
oil leakage.
If any defects are found, replace the shock absorber with a new
one.
#
Do not attempt to disassemble the rear shock
absorber unit. It is unserviceable.

REAR SHOCK ABSORBER DISPOSAL

)
* The rear shock unit contains high-pressure nitrogen
gas. Mishandling can cause explosion.
* Keep away from fire and heat. High gas pressure
caused by heat can cause an explosion.
* Release gas pressure before disposing.
GAS PRESSURE RELEASE
• Mark the drill hole at A, shown in the illustration, with a center
punch.
• Cover the rear shock absorber with a transparent vinyl bag 1.
• Hold the rear shock absorber 2 with a vice.
• Make a hole with a 3 mm drill.
)
* Be sure to wear protective glasses since drilling
chips and oil may fly off with blowing gas when the
drill bit has penetrated through the body.
* Make sure to drill at the specified position. Other-
wise, pressurized oil may spout out forcefully.
7 mm
(0.27 in)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents