Suzuki DL650K5 Service Manual page 150

3-96 ENGINE
OIL JET
• Apply SUZUKI SUPER GREASE to the new O-rings.
' 99000-25030: SUZUKI SUPER GREASE "A" (USA)
99000-25010: SUZUKI SUPER GREASE "A" (Others)
• Apply engine oil to the oil jet holes on the crankcase.
• Install each of the oil jet (#14) to the left and right crankcase,
as shown in the illustration.
#
Use the new O-rings to prevent oil leakage.
CYLINDER
• Coat SUZUKI BOND lightly to the mating surfaces at the part-
ing line between the right and left crankcases as shown.
+ 99104-31140: SUZUKI BOND "1207B" (USA)
. 99000-31110: SUZUKI BOND "1215" (Others)
• Apply engine oil to the sliding surface of the pistons.
• Fit the dowel pins 1, 2 and new gaskets 3, 4 to the crank-
case.
#
Use the new gaskets to prevent oil leakage.