Suzuki DL650K5 Service Manual page 97

VALVE GUIDE SERVICING
• Using the valve guide remover, drive the valve guide out
toward the intake or exhaust camshaft side.
" 09916-43210: Valve guide remover/installer
NOTE:
* Discard the removed valve guide subassemblies.
* Only oversized valve guides are available as replacement
parts. (Part No. 11115-18D72)
• Re-finish the valve guide holes in cylinder head with the
reamer and handle.
" 09916-34580: Valve guide reamer
09916-34542: Reamer handle
#
When refinishing or removing the reamer from the
valve guide hole, always turn it clockwise.
• Apply engine oil to the valve guide hole, and valve guide.
• Drive the valve guide into the hole with the special tools.
" 09916-43210: Valve guide installer/remover
09916-53330: Attachment
NOTE:
Install the valve guide until the attachment 1 contacts with the
cylinder head 2 .
#
Failure to oil the valve guide hole before driving the
new guide into place may result in a damaged guide or
head.
• After installing the valve guides, re-finish their guiding bores
using the reamer.
• Clean and oil the guides after reaming.
" 09916-33210: Valve guide reamer
09916-34542: Valve guide reamer handle
NOTE:
Insert the reamer from the combustion chamber and always turn
the reamer handle clockwise.
ENGINE 3-43