Suzuki DL650K5 Service Manual page 627

REAR WHEEL SPEED SENSOR/SENSOR ROTOR
REMOVAL
%
* The ABS is made up of many precision parts; never
subject it to strong impacts or allow it to become
dirty or dusty.
* Do not hit the sensor rotor when dismounting the
wheel.
* The wheel speed sensor cannot be disassembled.
• Raise the front wheel off the ground and support the motorcy-
cle with a jack or wooden block.
• Remove the rear wheel speed sensor by removing the mount-
ing bolt.
• Remove the rear wheel assembly. (!DL650K4 7-36)
"
Make sure that the motorcycle is supported securely.
• Remove the rear wheel speed sensor rotor 1.
%
When replacing the tire, make sure not to damage the
sensor rotor.
• Remove the seat. (!DL650K4 7-4)
• Disconnect the sensor coupler and remove the rear wheel
speed sensor. (!Page 134)
DL650K7/AK7 ('07-MODEL) 13-123