Suzuki DL650K5 Service Manual page 561

• Apply thin coat of the engine oil to the new cushion seal 3,
and the O-ring 4.
%
Replace the cushion seal and O-ring with the new
ones.
• Install the fuel injector 5 by pushing it straight to the delivery
pipe 6.
NOTE:
Align the coupler E of injector with boss F of the delivery pipe.
%
Never turn the injector while pushing it.
• Install the fuel delivery pipe/hose 7 to the throttle body
assembly.
%
Never turn the fuel injectors while installing them.
• Tighten the fuel delivery pipe mounting screws to the speci-
fied torque.
& Fuel delivery pipe mounting screw:
• Install the throttle link rod 8 and secondary throttle link rod
9.
NOTE:
The throttle link rod 8 is longer than the secondary throttle link
rod 9.
5 N·m (0.5 kgf-m, 3.5 lb-ft)
DL650K7/AK7 ('07-MODEL) 13-57