Suzuki DL650K5 Service Manual page 156

3-102 ENGINE
• Install the cam chain guide 7.
No.2 (Rear) Camshafts
• From the position where the front camshafts have now been
installed, rotate the generator rotor 360 degrees (1 turn) coun-
terclockwise and align the "F" line A on the generator rotor
with the index mark B of the valve timing inspection hole.
#
Pull the cam chain upward, or the chain will be caught
between crankcase and cam drive sprocket.
#
To adjust the camshaft timing correctly, be sure to
align "F" line A with the index mark B and hold this
position when installing the camshafts.
• Pull the cam chain lightly.
• The No.2 intake camshaft sprocket has an arrow mark "1R"
C. Install the intake camshaft so that the arrow C is aligned
with the mating surface of the cylinder head. (!3-103)
• Engage the cam chain with the intake camshaft sprocket.
NOTE:
Before installing the camshaft, check that the tappets are
installed correctly.
"2" "2"