Suzuki DL650K5 Service Manual page 79

REAR CYLINDER HEAD
• Remove the cylinder head bolt (M6) 1.
• Remove the cylinder bolts (M6) 2.
• Remove the cylinder head bolts 3 and washers.
NOTE:
When loosening the cylinder head bolts, loosen each bolt little
by little diagonally.
• Remove the cylinder head 4.
• Remove the cylinder head gasket 5, dowel pins 6 and cam
chain guide 7.
REAR CYLINDER
• Remove the cylinder nuts 1 and clamp.
• Remove the cylinder 2.
• Remove the cylinder base gasket 3 and dowel pins 4.
NOTE:
Make sure that the oil jet 5 is inserted in the crankcase.
ENGINE 3-25