Sensors; Ckp Sensor Inspection; Ckp Sensor Removal And Installation; Iap Sensor Inspection - Suzuki DL650K5 Service Manual

Table of Contents

SENSORS

The crankshaft position sensor is installed in the generator

cover. ("4-23)

CKP SENSOR REMOVAL AND INSTALLA-

• Remove the generator cover. ("3-26)

• Install the generator cover in the reverse order of removal.

The intake air pressure sensor is installed at the rear side of the

air cleaner box. ("4-25)

IAP SENSOR REMOVAL AND INSTALLA-

• Lift and support the fuel tank. ("5-7)

• Remove the IAP sensor from the air cleaner box.

• Install the IAP sensor in the reverse order of removal.

The throttle position sensor is installed at the left side of the

No.2 throttle body. ("4-28)

• Remove the air cleaner box. ("5-15)

• Remove the TP sensor. ("5-19)

• Install the TP sensor in the reverse order of removal.

$ TP sensor mounting screw: 3.5 N·m (0.35 kgf-m, 2.5 lb-ft)

• Adjust the TP sensor. ("4-16)

The ECT sensor is installed on the thermostat case. ("4-31)

ECT SENSOR REMOVAL AND INSTALLA-

• Remove the ECT sensor. ("6-10)

• Install the ECT sensor in the reverse order of removal.

$ ECT sensor: 19 N·m (1.9 kgf-m, 13.5 lb-ft)

FI SYSTEM DIAGNOSIS

Show Quick Links

Table of Contents