Suzuki DL650K5 Service Manual page 207

Table of Contents

Advertisement

Step 2
1) Disconnect the injector couplers.
2) Turn the ignition switch ON.
3) Measure the injector voltage between Y/R wire (No.1 injector
coupler and No.2 injector coupler) and ground.
% Injector voltage: Battery voltage
NOTE:
Injector voltage can be detected only 2 seconds after ignition
switch is turned ON.
! 09900-25008: Multi circuit tester set
' Tester knob indication: Voltage (()
Is the voltage OK?
• Gr/W or Gr/B wire open or shorted to ground, or
poor 5 or 6 connection.
• If wire and connection are OK, intermittent trou-
YES
ble or faulty ECM.
• Recheck each terminal and wire harness for
open circuit and poor connection.
NO
• Inspect the fuel pump relay. ("5-10)
(+ Y/R – - Ground)
FI SYSTEM DIAGNOSIS
2
V
4-43
V

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents