Suzuki DL650K5 Service Manual page 637

FRONT WHEEL SPEED SENSOR INSTALLATION (For DL650A)
Sensor
clamp
Hold the wheel speed sensor lead wire with
*1
clamp on the top of the radiator.
Align the protector with the edge of radiator
*2
shield.
Clamp the speed sensor lead wire to brake
*3 hose with wheel speed sensor at white mark-
ing.
Set the wheel speed sensor lead wire to the
*4
part of the brake hose union with a clamp.
Hold the wheel speed sensor lead wire with
*5
guide at white marking position.
Pass through the wheel speed sensor lead wire
*6
inside the boss of front fork outer tube.
*7 Clamp the wheel speed sensor lead wire to
brake hose at sleeve.
NOTE: Cut the tip of clamp after clamping.
*1
*2
*5
*6
21˚
*10
*7
*11
*8
Pass through the wheel speed sensor lead wire
in front of the brake hose. Make clearance
*8
between the wheel speed sensor lead wire and
the front fender.
*9 Letters should face outside.
Pass through the wheel speed sensor lead wire
*10
forward of the brake hose.
Clamp the wheel speed sensor lead wire for-
*11
ward of the brake hose.
Pass through the speed sensor lead wire inside
*12
the boss of front fork outer tube.
Clamp the wheel speed sensor lead wire to
*13 brake hose with speed sensor lead wire at yel-
low marking.
DL650K7/AK7 ('07-MODEL)
*3 *4
*9
*13
*12
21˚
13-133