Radiator Cap; Inspection; Water Hose - Suzuki DL650K5 Service Manual

Table of Contents

RADIATOR CAP

• Remove the radiator cap. (#6-3)

• Fit the cap 1 to the radiator cap tester 2.

• Build up pressure slowly by operating the tester. Make sure

that the pressure build-up stops at 95 – 125 kPa (0.95 – 1.25

kgf/cm², 13.5 – 17.8 psi) and that, with the tester held stand-

still, the cap is capable of holding that pressure for at least 10

• Replace the cap if it is found not to satisfy above require-

% Radiator cap valve opening pressure

Standard: 95 – 125 kPa

(0.95 – 1.25 kgf/cm², 13.5 – 17.8 psi)

• Remove the cowling. (#7-5)

Any water hose found in a cracked condition or flattened or

water leaked must be replaced.

Any leakage from the connecting section should be corrected by

proper tightening.

COOLING AND LUBRICATION SYSTEM

Show Quick Links

Table of Contents