Suzuki DL650K5 Service Manual page 631

• Loosen the flare nuts 9 and disconnect the brake pipes.
• Disconnect the ABS control unit coupler 0.
• Remove the ABS control unit/HU by removing the mounting
bolts.
INSTALLATION
Installation is in the reverse order of removal. Pay attention to
the following points.
• Tighten the brake pipe flare nuts to the specified torque.
& Brake pipe flare nut: 16 N·m (1.6 kgf-m, 11.5 lb-ft)
%
* Route the brake hoses and pipes correctly.
(!Page 131 and 132)
* Make sure to hold the brake pipe when tightening the
flare nut, or it may be misaligned.
• Bleed air from the brake fluid circuit.
(!DL650K4 2-25)
"
Never ride the motorcycle before bleeding the air.
DL650K7/AK7 ('07-MODEL) 13-127