Suzuki DL650K5 Service Manual page 298

7-22 CHASSIS
• Install the oil seal stopper ring 6 and the dust seal 7.
A Dust seal
B Oil seal stopper ring
C Oil seal
D Oil seal retainer
E Guide metal
CYLINDER
• Install the rebound spring 1 to the cylinder 2.
• Apply fork oil to the cylinder ring.
• Install the cylinder into the front fork.
• Apply THREAD LOCK to the cylinder bolt.
#
Use a new gasket 3 to prevent oil leakage.
* 99000-32050: THREAD LOCK "1342"
• Tighten the cylinder bolt to the specified torque with the spe-
cial tools.
$ 09940-34520: "T" Handle
09940-34531: Attachment A
! Cylinder bolt: 20 N·m (2.0 kgf-m, 14.5 lb-ft)
NOTE:
* If the cylinder turns together with the cylinder bolt, temporarily
install the fork spring, spacer, washer and cap bolt to prevent
the cylinder from turning.
* Check the front fork for smoothness by stroking it after install-
ing the cylinder.