Suzuki DL650K5 Service Manual page 144

3-90 ENGINE
• Install the washer 1 and pin 2.
• Install the oil pump driven gear 3.
• Install the snap ring 4.
CLUTCH
• Install the spacer 1 and apply ENGINE OIL to it.
• Install the primary driven gear assembly 2 onto the counter-
shaft.
NOTE:
Be sure to engage the oil pump drive and driven gears, primary
drive and driven gears.
• Install the thrust washer 3.
• Install the clutch sleeve hub 4 and lock washer 5.
#
Replace the lock washer 5 with a new one.
• Install the clutch sleeve hub nut 6.
NOTE:
The chamfer side A of the clutch sleeve hub nut faces outward.