Suzuki DL650K5 Service Manual page 557

• Disconnect the throttle cables from their drum.
• Dismount the throttle body assembly.
%
* Be careful not to damage the throttle cable bracket
and fast idle lever when dismounting or remounting
the throttle body assembly.
* After disconnecting the throttle cables, do not snap
the throttle valve from full open to full close. It may
cause damage to the throttle valve and throttle body.
THROTTLE BODY DISASSEMBLY
%
* Be careful not to damage the throttle lever when dis-
assembling the throttle body.
* The throttle body is assembled precisely in factory.
Do not disassemble it other than shown in this man-
ual.
• Remove the vacuum hoses (1, 2).
• Disconnect the fuel feed hose 3.
• Remove the throttle link rod 4 and secondary throttle link rod
5.
NOTE:
The throttle link rod 4 is longer than the secondary throttle link
rod 5.
• Remove the fuel delivery pipe/hose 6.
DL650K7/AK7 ('07-MODEL) 13-53