4. PowerMaster-30 G2 INSTALLATION
4. PowerMaster-30 G2 INSTALLATION
Required tool: Philips screwdriver #2.
PowerMaster-30 G2 mounting process is shown in Figures 4.1 - 4.11.
4.1 Opening the PowerMaster-30 G2 Control Panel and Bracket Mounting
To Mount the Unit:
1. Release the screws (1 of 2 is shown in Figure 4.1)
2. Remove the front cover
3. Mark 4 drilling points on the mounting surface
4. Drill 4 holes and insert wall anchors
5. Fasten the back unit with 4 screws
16
Figure 4.1 – Back Unit Mounting
A. Mounting surface
B. Back unit
D-303222 PowerMaster-10/30 G2 Installer's Guide