Troubleshooting Windows 2000 Modem Connect - Orban OPTIMOD 6300 Operating Manual

OPTIMOD 6300 DIGITAL
a) Click S
TART
C
UP ONNECTIONS
b) Right click the name of your connection and access "Properties."
c) Go to the "Generals" tab and select the "Configure" button.
d) Set the M
e) Select OK and try your connection again.
T) If you see: "Error 619: The specified port is not connected."
Make sure the I
a) On the 6300, go to S
b) Set PC C
c) Try your connection again.

Troubleshooting Windows 2000 Modem Connect:

If you are having trouble establishing a connection, check your New Connection's
properties to make sure they are set up correctly:
A) Click "Start / Programs / Accessories / Communications / Network and Dialup
Connections" to bring up the Network Connections screen.
B) In the "Network Connections" window, right-click "Optimod 6300 - Modem"
and choose "Properties."
C) The "Properties" window opens for "Optimod 6300 – Modem."
D) Click the "Properties" button.
E) Select the "General" tab and make sure that "Connect Using" displays the
correct modem and port.
F) Click the "Configure..." button.
G) Set the "Maximum Speed (bps) to 115200.
H) Check the "Enable hardware flow control," make sure all other hardware fea-
tures are unchecked. Then click "OK."
I) Click the "Networking" tab on the "Properties" window.
J) Set "Type of dial-up server I am calling" to "PPP: Windows 95 / 98 / NT4 / 2000,
Internet."
K) Select the "Settings" button and make sure all PPP settings are unchecked.
Then click "OK."
L) In "Components checked are used by this connection," uncheck all except for
"Internet Protocol (TCP/IP)."
M) Select "Internet Protocol (TCP/IP)" and then click the "Properties" button. The
"Internet Protocol (TCP/IP) Properties" window opens.
/ P / A
ROGRAMS CCESSORIES
.
S ( ) to 115200.
AXIMUM PEED BPS
T
on the 6300 is correct:
NTERFACE YPE
> N
ETUP ETWORK
to D
ONNECT IRECT .
/ C / N
OMMUNICATIONS
& R > P C
EMOTE C ONNEC
TROUBLESHOOTING
D -
ETWORK AND IAL
.
5-11