Security And Passcode Programming - Orban OPTIMOD 6300 Operating Manual

OPTIMOD 6300 DIGITAL
F) When you have programmed an event to your satisfaction, press the S
E
button.
VENT
You will return to the automation menu.
4. To edit an existing event:
A) Press the V
B) Turn the knob until you see the event you wish to edit.
C) Press the E
D) Edit the event as desired. Use the same technique as adding an event.
See step 3 on page 2-40.
E) Press the S
5. To delete an event:
A) Press the D
B) Choose the event to delete with the knob.
You can search by date or by event (i.e., recalling a given preset). Use the
N
button to navigate from one type of search to the other type.
EXT
C) When you have located the event you want to remove, press the D
E
VENT button.
This action will immediately delete the event. There is no "are you sure"
warning message. To abort the deletion, press the E
D
ELETE

Security and Passcode Programming

[Skip this step if you do not plan to use PC Remote software or do not plan to lock
out the front panel locally.]
Your Optimod has several levels of security to prevent unauthorized people from
changing its programming or operating state. Security controls access to the front
panel and to anyone connecting to the Optimod through a direct serial connection,
dial-up networking (through modems), or its Ethernet port.
The security levels are:
1. All Screens (i.e., administrator level)
2. All Screens except Security
3. All screens except Modify and Security
4. Presets, Modify, Save, Memory, and Automation
> E E
button.
IEW DIT VENT
E
button.
DIT VENT
E
button to store your edits.
AVE VENT
E
ELETE VENT button.
E
button.
VENT
INSTALLATION
AVE
ELETE
button, not the
SC
2-41