Dial-Up Networking And The Passcode; If You Have Forgotten Your Passcode - Orban OPTIMOD 6300 Operating Manual

2-44
INSTALLATION

Dial-up Networking and the Passcode

If You Have Forgotten Your Passcode

The P
ASSCODE screen will appear.
B) Enter a passcode using the four soft buttons.
The 6300 functionality that you can access depends on the security level
of the passcode that you entered.
After you have finished working, the panel will automatically re-lock af-
ter the time delay you set in S
new delay at any time if you have an A
When you make a Windows Dial-up Networking connection, Windows will ask you
for your passcode. To allow the connection to occur, enter any passcode that you set
at the 6300's front panel. Once your PC is connected to the 6300, you will be able to
access the 6300 functionality corresponding to the security level of your passcode.
You can reset factory defaults and wipe out security passcodes (in case you forgot
your A A
LL CCESS passcode).
A) Remove power from the 6300.
B) While pressing both the E
The Restore Defaults screen appears.
C) To gain access to the 6300, press the E
D) Reprogram passcodes as necessary; see To Create a Passcode on page 2-42.
The R D
ESTORE EFAULTS
System Setup and Input/output parameters to their factory default set-
tings. It also erases all passcodes. You should never need to use this but-
ton in an existing installation, although it is a convenient way to make
the 6300 "factory fresh" if it is being installed in a different facility.
The R D
ESTORE EFAULTS
keep or erase any user presets that exist in your unit.
> S
ETUP ECURITY
A
LL CCESS
and S
SCAPE ETUP buttons, restore power.
A
RASE LL
button (in the Restore Defaults screen) restores all
button takes you to a screen that allows you to
ORBAN MODEL 6300
> A
. (You can set a
UTOLOCK
passcode.)
P
ASSCODES soft button.