Table of Contents
Advertisement
OPTIMOD 6300 DIGITAL
8. Repeat step 7 for Digital Out #2.
9. Optional tests.
A) You can test each GPI (Remote Interface) input for functionality in the obvi-
ous way, by programming a function for it and then verifying that the func-
tion executes when you activate the input. To program a GPI input, see
Remote Control Interface Programming on page 2-45.
B) You can test the RS-232 Port for functionality by verifying that you can con-
nect to a PC through a null modem cable. See Networking and Remote Con-
trol starting on page 2-46 (in particular, step 4 on page 2-48).
10. Return OPTIMOD 6300 to service.
A) Remove the 620 resistors connected across the outputs.
B) Restore your normal operating parameters, using the notes you made in step
(1.A) on page 4-7.
C) Navigate to S
D) Recall your normal operating preset.
> T
> M
and choose O
ETUP
EST
ODE
.
PERATE
4-11
MAINTENANCE
Advertisement
Table of Contents
Troubleshooting
