Orban OPTIMOD 6300 Operating Manual page 136

2-82
INSTALLATION
If you are using an external modem, connect the modem to a serial port
on your PC and make sure the modem is connected to a working phone
line.
b) On your PC, click "Start / Settings / Control Panel / Phone and Modem Op-
tions."
c) Click the "Modems" tab.
d) Verify that your modem appears in the list available under "The following
Modems are installed."
e) Verify that your modem is "Attached to" the correct port.
If your modem is unavailable or not attached to the correct port, you will
need to Add it. See your Windows documentation.
f) If your modem is available in the list available under "The following Mo-
dems are installed" and it is attached to the correct port, then click "Prop-
erties" for that modem.
g) Make sure the port speed is set at 115200.
h) Click "OK."
C) Create a new Windows XP modem
connection:
a) Launch 6300 PC Remote.
b) Choose "Connect / New 6300."
The Connection Proper-
ties window opens.
c) Give your 6300 a name (e.g.,
"KABC") by entering this name
in the "6300 Alias" field.
d) If you wish to have 6300 PC Re-
mote remember the password
for this Optimod, enter the pass-
word in the "Password" field.
You must enter a valid
password to connect. This
means that at least one
6300 passcode must have
been assigned via the
6300's front panel. (See
To Create a Passcode on
page 2-42.)
ORBAN MODEL 6300