About The Processing Structures - Orban OPTIMOD 6300 Operating Manual

3-20
OPERATION

About the Processing Structures

B) Press the S P
AVE
The Save Preset screen appears.
C) Choose a name for your preset.
Some non-alphanumeric characters (such as < and >) are reserved and
cannot be used in preset names.
D) Use the knob to set each character in the preset name. Use the N
buttons to control the cursor position.
E) Press the S C
AVE

If the name that you have selected duplicates the name of a factory pre-
set, the 6300 will suggest an alternate name.
You cannot give a user preset the same name as a factory preset.

If the name you have selected duplicates the name of an existing user pre-
set, the 6300 warns you that you are about to overwrite that preset. An-
swer Y if you wish to overwrite the preset and N
ES
swer N , the 6300 will give you an opportunity to choose a new name for
O
the preset you are saving.
You can save user presets from the 6300 PC Remote application. (See
Using the 6300 PC Remote Control Software on page 3-64.) Please note
that when you save presets from the PC Remote application, you save
them in the 6300's memory (as if you had saved them from the 6300's
front panel). The PC Remote application also allows you to archive pre-
sets to your computer's hard drive (or other storage device) and to re-
store them. However, archiving a preset is not the same as saving it. Ar-
chived presets reside on a storage medium supported by your computer,
while saved presets reside in the 6300's local non-volatile memory. You
cannot archive a preset until you have saved it. (See To back up user pre-
sets, system files, and automation files onto your computer's hard drive
on page 3-67.)
Note that if, for some reason, you wish to save an unmodified preset (ei-
ther Factory or user) under a new name, you must temporarily make an
arbitrary edit to that preset in order to make the S
pear. After you have saved the preset, reverse the edit and save the pre-
set again.
If you want to create your own User Presets, the following detailed discussion of the
processing structures is important to understand. If you only use Factory Presets or if
you only modify them with L
but you do not need to understand it to get excellent sound from the 6300. We
have carefully designed the 6300's factory presets and most users will not need to go
beyond these.
RESET button.
HANGES button.
-M
ESS ORE , you may still find the material interesting
ORBAN MODEL 6300
and P
EXT
otherwise. If you an-
O
P
button ap-
AVE RESET
REV