Orban OPTIMOD 6300 Operating Manual page 128

2-74
INSTALLATION
H) In the Advance TCP/IP Set-
tings window, click on the
Advance
a) Unselect Use
gateway on
network.
b) Click OK to close this
window.
This prevents Win-
dows 7 from rout-
ing all networking
requests to
Optimod.
c) Click OK to
Internet Protocol version 4
Properties window.
d) Click OK at the Direct
Serial PPP
window to save the Direct
Serial PPP settings.
4. Launch an existing Windows 7 Direct connection.
Once you have set up a "connection" specifying Direct Connect in the 6300 PC
Remote application (see To set up a new connection on page 3-64), choosing this
connection from 6300 PC Remote automatically opens a Windows Direct Connec-
tion to your 6300.
You can connect by selecting the desired con-
nection from the drop-down list in the C
menu.
You can also connect by double-clicking the
connection in the "Connection List" window.
A dialog bubble will appear on the bottom right
hand corner of the screen verifying your con-
nection if the connection is successful.
If you have trouble making a connection, double-check step (3.F) on page 2-72. If
you have trouble the first time after creating a connection according to the in-
structions above, try restarting your computer to clear its serial port.
5. To change the properties of an existing connection:
Right-click the connection in the "connection List" window and choose "Proper-
ties." The "Connection properties" window opens (see page 2-56).
button.
default
remote
your
close the
Properties
ONNECT
ORBAN MODEL 6300