Orban OPTIMOD 6300 Operating Manual page 254

5-10
TROUBLESHOOTING
A) Click "Start / Programs / Accessories / Communications / Network and Dialup
Connections" to bring up the Network Connections screen.
B) In the "Network Connections" window, right-click "Optimod 6300 - Direct"
and choose "Properties."
C) The "Properties" window opens for "Optimod 6300 - Direct
D) Click the "Networking" tab.
E) Set "Type of dial-up server I am calling" to "PPP: Windows 95 / 98 / NT4 / 2000,
Internet."
F) Select the "Settings" button and make sure all PPP settings are unchecked.
Then click "OK."
G) In "Components checked are used by this connection," uncheck all except for
"Internet Protocol (TCP/IP)."
H) Select "Internet Protocol (TCP/IP)" and then click the "Properties" button. The
"Internet Protocol (TCP/IP) Properties" window opens.
I) Choose "Obtain an IP address automatically" and "Obtain DNS server address
automatically"
J) Click the "Advanced..." button on the "Internet Protocol (TCP/IP)" Window.
K) In the "Advanced TCP/IP Settings" select the "General" Tab; make sure that
no check boxes are checked.
L) In the "Advanced TCP/IP Settings" select the "DNS" Tab.
M) In the "Advanced TCP/IP Settings" select the "WINS" Tab.
N) Click "OK" to dismiss the "Advanced TCP/IP Settings" window.
O) Click "OK" to dismiss the "Internet Protocol (TCP/IP) Properties" window.
P) Click "OK" to dismiss the window whose name is your new connection.
Q) Click "Cancel" to dismiss the "Connect [nnnn]" dialog box
R) Restart your computer. (This resets the serial port and reduces the likelihood
that you will encounter problems connecting to the 6300.)
S) If you see: "Error 777: The connection failed because the modem (or other
connecting device) on the remote computer is out of order":
The "remote computer" is actually the 6300 and it is not out of order;
you just need to set the Maximum Speed (Bits per second) to 115200. If
you already set this speed when you configured your PC ports, you
shouldn't have this problem.
The 6300 communicates at 115200 bps. COM ports on some older PCs are
incapable of communications at this rate and may not work reliably.
Most newer PCs use 16550-compatible UARTS, which support the 115200
bps rate.
If you do see this warning message, you can reset the Maximum BPS
Speed by accessing P
for the connection:
ROPERTIES
ORBAN MODEL 6300