Orban OPTIMOD 6300 Operating Manual page 139

OPTIMOD 6300 DIGITAL
e) Set "Maximum
"115200."
f) Check "Enable hardware flow con-
trol."
g) Check "Enable modem error control."
h) Check "Enable modem compression."
i) Make sure that no other box is
checked.
j) Click "OK."
k) Select the Networking tab.
l) Make sure that "PPP: Windows 95 /
98 / NT4 / 2000, Internet" ap–pears in
the "Type of dial-up server I am call-
ing" field.
m)Make sure that "Internet Protocol
(TCP/IP)
You may leave "Client for Microsoft
Networks" checked if you like.
n) Click "OK."
o) When the "Connection properties"
window ap-pears, click "OK."
2. Launch an existing Windows XP modem connection.
Once you have set up a "connection" specifying a modem connection in the 6300
PC Remote application (see To set up a new connection on page 3-64), choosing
this connection from 6300 PC Remote automatically opens a Windows modem
connection to your 6300.
speed (bps)" to
is checked.
2-85
INSTALLATION