Orban OPTIMOD 6300 Operating Manual page 70

2-16
INSTALLATION
 MB+LIM (stereo enhancement, equalization, AGC, 2-Band or 5-Band com-
pression, and look-ahead peak limiting)
See the notes for step 10 above.
12. Set the digital output #2 source.
A) Press the N
EXT button.
B) [Skip this step if you will not be using digital output #2.]
Turn the knob to choose one of the following:
 AGC (stereo enhancement, equalization, and AGC without peak limiting)
 AGC+LIM (stereo enhancement, equalization, AGC, and look-ahead peak
limiting)
 MULTIBAND (stereo enhancement, equalization, AGC, and 2-Band or 5-
Band compression without peak limiting)
 MB+LIM (stereo enhancement, equalization, AGC, 2-Band or 5-Band com-
pression, and look-ahead peak limiting)
13. Set the digital output #1 sample rate.
A) Press the N
EXT button.
B) [Skip this step if you will not be using digital output #1.]
Turn the knob to set the Digital O
88.2, or 96 kHz.
The internal sample rate converter sets the rate at the 6300's digital out-
put. This adjustment allows you to set the output sample rate to ensure
compatibility with equipment requiring a fixed sample rate. In all cases,
the 6300's internal processing sample rate is 48 kHz.
14. Set the digital output #2 sample rate.
A) Press the N
EXT button.
B) [Skip this step if you will not be using digital output #2.]
Turn the knob to set the Digital O
88.2, or 96 kHz.
15. Prepare to set output levels.
A) Press the N
EXT button.
You can use either program material or tone to set the output level (and
thus, the modulation).
 To use tone, press the Y
tone that could be disturbing to listeners.
#1 S
UTPUT AMPLE
#2 S
UTPUT AMPLE
button. Be careful—the 6300 will emit a loud
ES
ORBAN MODEL 6300
R
ATE to 32, 44.1, 48,
R
ATE to 32, 44.1, 48,