Installing 6300 Pc Remote Control Software - Orban OPTIMOD 6300 Operating Manual

OPTIMOD 6300 DIGITAL
a) Check "Automatically synchronize with an Internet time server" to set your
Optimod's S
b) Set "Server" to the desired timeserver.
c) Click the "Update Now" button to synchronize your computer's clock to
the selected timeserver. If this is successful, this means that you can connect
to the selected timeserver over your network.
 The I
NTERNET
Optimod PC Remote on Windows 2000, you must enter the timeserver from
your Optimod's front panel as an IP address (step 4 on page 2-50).
 If the timeserver you selected in Windows is a named address instead of an
IP address, your Optimod will resolve it correctly but the IP address that ap-
pears in your Optimod's display will be 0.0.0.0.
 To use PC Remote to turn off your Optimod's automatic synchronization,
uncheck "Automatically synchronize with an Internet time server" on your
PC. Then click the "Update Now" button on PC Remote.
E) Navigate to Optimod PC Remote's S
C
button.
LOCK
 If you are running Windows XP, PC Remote will download your computer's
currently specified timeserver into your Optimod.
 PC Remote will adjust your Optimod's O
computer's time zone setting.
 PC Remote will synchronize your Optimod's clock with your computer's
clock.
F) It is wise to disconnect from PC Remote and then to press the S
ton on your Optimod [step (B) on page 2-50]. This is to test the ability of your
Optimod to synchronize to the selected timeserver and to ensure that your
Optimod's clock is set accurately.
NOTE: Manually setting your Optimod's clock via Set Time, Set Date, Daylight
Time, and the remote contact closure Reset to Hour and Reset to Midnight will
not work when the automatic synchronization function is active. To inactivate
this function (thereby permitting manual setting to work), set the S
O .
FF

Installing 6300 PC Remote Control Software

This section briefly summarizes the procedure for installing 6300 PC Remote soft-
ware on existing 6300s. If required, you will find more detailed instructions in the
.pdf file automatically installed on your computer by Orban's installer program,
Setup6300_x.x.x.x.exe, where "x.x.x.x" represents the software version you are
installing. (For example, for version 1.0 software, this would be 1.0.0.0.)
P
to "24."
YNC ERIOD
T
IME tab is not available in Windows 2000. If you are running
/ U tab and click the S
ETUP TILITY
setting to correspond to your
FFSET
INSTALLATION
6300
ET
N
YNC OW but-
P
to
YNC ERIOD
2-51