Section 3 Operation; 6300 Front Panel - Orban OPTIMOD 6300 Operating Manual

OPTIMOD 6300 DIGITAL
Section 3
Operation

6300 Front Panel


Screen Display labels the four soft buttons and provides control-setting infor-
mation.

Screen Contrast button adjusts the optimum viewing angle of the screen dis-
play.

Four Soft buttons provide access to all 6300 functions and controls. The func-
tions of the soft buttons change with each screen, according to the labels at the
bottom of each screen
 Next and Prev ( and ) buttons scroll the screen horizontally to accommo-
date menus that cannot fit in the available space. They also allow you to move
from one character to the next when you enter data into your 6300.
These buttons flash when a scrolling menu is in use. Otherwise, they are
dark.

Control Knob changes the setting that is selected by the soft buttons. To
change a value, you usually have to hold down a soft button while you are turn-
ing the control knob.

Recall button allows you to recall a Factory or User Preset.
Selecting the R
step C) on page 2-17 for instructions on recalling a preset.

Modify button brings you to list of controls that you can use to edit a Factory or
User Preset.
If you edit a Factory Preset, you must save it as a new User Preset to re-
tain your edit.

Setup button accesses the technical parameters necessary to match the 6300 to
your transmission system.
button does not immediately recall a preset. See
ECALL
3-1
OPERATION