To Modify Input / Output And System Setup; To Modify Automation; To Group Multiple 6300S; Navigation Using The Keyboard - Orban OPTIMOD 6300 Operating Manual

OPTIMOD 6300 DIGITAL
c) Click the R
E) To restore a system file:
a) Set the F
b) Select the desired system file in the dialog box.
c) Click the R
F) To restore an automation file:
a) Set the F
b) Select the desired automation file in the dialog box
c) Click the R
G) Click D to dismiss the R
ONE
To modify I
NPUT
Choose S
ETUP
the button bar.
To set a control, click it (it will become highlighted) and then use the wheel on
the mouse to adjust it. You can also use the + and – keys on the numeric keypad
to adjust any control.
To modify A
UTOMATION
A) Choose A
UTOMATION
An Automation Dialog box will open.
B) Click the N
EW
Controls to set the event type and time are available on the right hand
side of the dialog box.
C) Check the E
able automation.

To group multiple 6300s:

Right-click A
LL
You can add multiple 6300 to a single group to help organize a network of 6300.
However, only one 6300 from within a group can be connected to 6300 PC Re-
mote at any one time.

Navigation Using the Keyboard

In general, PC Remote uses standard Windows conventions for navigation.
ESTORE button.
O T
field to the System Setup file type (*.orb63setup).
ILES F YPE
button.
ESTORE
O T
ILES F YPE field to the Automation file type (*.orb63autom)
button.
ESTORE
ESTORE
/ and S
OUTPUT YSTEM
from the T
menu or click the third-from-the-left button on
OOLS
:
from the T
OOLS
E
to create a new event
VENT
A
NABLE UTOMATION check box at the top of the dialog box to en-
C in the Connections List and select N
ONNECTIONS
dialog box.
S :
ETUP
menu.
OPERATION
G
.
EW ROUP
3-69