Section 2 Installation; Installing The 6300 - Orban OPTIMOD 6300 Operating Manual

OPTIMOD 6300 DIGITAL
Section 2
Installation

Installing the 6300

Allow about 2 hours for installation.
Installation consists of: (1) unpacking and inspecting the 6300, (2) mounting the
6300 in a rack, (3) connecting inputs, outputs and power, (4) optional connecting of
remote control leads and (5) optional connecting of computer interface control
leads.
When you have finished installing the 6300, proceed to "Quick Setup," on page 2-
12.
1. Unpack and inspect.
If you note obvious physical damage, contact the carrier immediately to make a
damage claim. Packed with the 6300 are:
1ea. Operating Manual
2ea. Line Cords (domestic, European)
4ea. Rack-mounting screws, 10-32 x ½—with washers, #10
1ea. PC Remote Software CD
Save all packing materials! If you should ever have to ship the 6300 (e.g., for ser-
vicing), it is best to ship it in the original carton with its packing materials be-
cause both the carton and packing material have been carefully designed to pro-
tect the unit.
Complete the Registration Card and return it to Orban. (please)
The Registration Card enables us to inform you of new applications, per-
formance improvements, software updates, and service aids that may be
developed, and it helps us respond promptly to claims under warranty
without our having to request a copy of your bill of sale or other proof
of purchase. Please fill in the Registration Card and send it to us today.
(The Registration Card is located after the cover page).
Customer names and information are confidential and are not sold to
anyone.
2-1
INSTALLATION