U207/Chk Panel Key; Display Description - Kyocera ECOSYS M3040dn Service Manual

U207 Chk Panel Key
Description
Checks operation of the operation panel keys.
Purpose
To check operation of all the keys on the operation panel.
Method
1. Press the start key. The screen for executing is displayed.
2. [Count0] is displayed and the left most LED on the operation panel lights.
Display
Cnt
3. As the keys lined up in the same line as the lit indicator are pressed in the order from the top to
the bottom, the figure shown on the touch panel increases in increments of 1. When all the
keys in that line are pressed and if there are any LEDs corresponding to the keys in the line on
the immediate right, the top LED in that line will light.
4. When all the keys on the operation panel have been pressed, all the LEDs light for up to 10
seconds.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Keypress counter.
1-3-40
2NM/2NX/2NY/2NZ/2P0/2P6-1
Description