Detaching And Refitting The Dp Switchback Motor - Kyocera ECOSYS M3040dn Service Manual

(2-1) Detaching and refitting the DP switchback motor

Procedure
1. Open DP top cover.
2. Unhook five hooks and remove DP rear
cover.
3. Remove the connector from DP shift-
back motor.
4. Remove two screws and DP shiftback
motor from DP.
5. Check or replace the DP shiftback
motor and refit all the removed parts.
DP top cover
DP
Connector
1-5-79
2NM/2NX/2NY/2NZ/2P0/2P6
Hooks
DP rear cover
Figure 1-5-132
DP shiftback motor
Screw
Figure 1-5-133
Hooks
Screw