2. Route the USB cable from the IC card
reader through the IC card reader
holder ribs, wind around its back and
route through another rib.
3. Slide the left operation lid and then
remove it.
4. Remove the left operation panel cover
and the left operation panel sheet.
5. Remove the IC card reader cover.
IC card reder holder
Figure 1-2-38
Left
operation lid
IC card reader cover
Figure 1-2-39
1-2-21
2NM/2NX/2NY/2NZ/2P0/2P6
USB cable
Rib
Rib
Left operation
panel cover
Left operation
panel sheet
Operation
panel assembly