Adding A Destination On One Touch Key (One Touch Key) - Kyocera ECOSYS MA2100cwfx Operation Manual

Preparation before Use > Registering Destinations in the Address Book
Adding a Destination on One Touch Key (One Touch
Key)
Assign a new destination (contact or group) to an one touch key. A maximum of 22 destinations can be registered.
NOTE
• Numbers 1 to 11 are the One Touch Key numbers while the [Shift Lock] indicator is switched off. Numbers 12 to 22
are the One Touch Key numbers while the [Shift Lock] indicator is switched on by selecting the [Shift Lock] key.
• Refer to the following for use of One Touch Key.
Checking and Editing Destinations (page 5-35)
• You can add One Touch keys and change their settings on Command Center RX.
Registering Destinations (page 2-58)
1
2
Select the One Touch Key to be registered.
1
In the Send or FAX screen, press the One Touch Key that you want to register and hold it
(2 seconds or more).
2
[▲] [] key > key number > [OK] key
Select a One Touch Key number with no registered destination.
Select the destinations.
Select the destination to be registered to the One touch key from the destinations registered in
the addresses and select the [OK] key.
NOTE
Select [Menu] and select [Search(Name)] to search using a name.
The destination will be added to the One Touch Key.
3-27