U660/Set Calls - Kyocera ECOSYS M3040dn Service Manual

U660 Set Calls
Description
Makes setting regarding the network control unit (NCU).
Purpose
To be executed as required.
Method
1. Press the start key.
2. Select the item to be set.
Display
Exchange
Dial Tone
Busy Tone
PBX Setting
DC Loop
Setting: Exchange
Selects if a fax is to be connected to either a PBX or public switched telephone network.
1. Select the setting.
Display
PSTN
PBX
* : Initial setting: PSTN
2. Press the start key. The setting is set.
Setting: Dial Tone
Selects if the dial tone is detected to check the telephone is off the hook when a fax is connected
to a public switched telephone network.
1. Select the setting.
Display
On
Off
* : Initial setting: On
2. Press the start key. The setting is set.
Sets the connection to PBX/PSTN.
Sets PSTN dial tone detection.
Sets busy tone detection.
Setting for a PBX.
Sets the loop current detection before dialing.
Connected to the public switched telephone network.
Connected to a PBX.
Detects the dial tone.
Does not detect the dial tone.
1-3-88
2NM/2NX/2NY/2NZ/2P0/2P6
Description
Description
Description